Charging:
Before you begin using your Mobal WiFi device, please ensure that it is fully charged.
For additional information on how to charge your device, click here.
Powering On
Once the device has been charged, you can then switch it on using the power button.
To switch the device on, press and hold the power button for 3 seconds.
When you are ready to switch the device off, press and hold the same button again for 5 seconds.
Getting Connected
Now that you have turned the device on, wait a moment while it connects to the local network.
You’ll see on your device that it’s successfully connected. Take a look at our device guides to check how your device displays its connection status.
You can then scan for WiFi networks on your device (such as your PC, Laptop or Smart Phone etc) to find the SSID for the Mobal WiFi network.
The SSID for this network will usually begin with AiR-WiFi’. This will also be displayed on the label on the back on your WiFi device.
Once you have located and selected the correct WiFi network, enter the password which is displayed on the label on the back of the device.
The device is now ready for use and you can begin to access the internet!